Start naszej darmowej aplikacji!

3$ zniżki na 1. zamówienie.

Otwórz APLIKACJĘ

Polecaj

TSKY 120A Sensored Brushless ESC Elektroniczny kontroler prędkości dla modelu samochodu RC

1/1

See Translation

125.17zł

~~32.51~~

4.44 16 recenzje

TSKY 120A Sensored Brushless ESC Elektroniczny kontroler prędkości dla modelu samochodu RC - niebieski

Kupon:

promocja:

Support COD payment

Warehouse & Fee

Select

HK:Wyślij między: Mar 22 - Mar 24

Product Options

Select

niebieski

Power source used: HKing 3S LiFePo4 4200 batteries. Used on: HKing Vandal with 3300KV generic brushless sensorless motor. I made it "waterproof" (I hope :) ) using Nanoprotech spray; disassembled it, sprayed it on, than assembled it back; Added extra layer of cheap eBay thermal pads (cheapest I found really); Used a power analyser to check the Amps the motor draws; It was about 70 Amps max with the config I had; About the product: - the fan is rated for 12 Volts, so using it with 2S LiPo will get the ESC hot in the long run, so keep that in mind; if you use 2S I would recommend using a proper fan; - good build quality, good solder joints; Programming the thing :) - use set button + manual (that I do not remember having it in the box) - did not use this method; - use USB Programming Adapter for HobbyKing X-Car 120A & 60A ESC; PRODUCT ID: 351000018 - I used this method, it works great! - use Turnigy Speed Controller Programming Card; PRODUCT ID: TG-Prog - I used this method, it works great also! No overheating issues, but that is normal considering the 9.9 Volts supplied by the LiFePo4 3S; Other users experienced problems using regular LiPo 3S and/or sensored motors. With my setup it was not the case, so for me it worked good. Exact same size as HKing 120 X-Car ESC, but I think the inside is different;

Dyskusja

Opis

Główne cechy:
Nadaje się do jazdy w terenie, mniej niż 1/10 dużych samochodów
120A prąd ciągły, nieustalony prąd 760A
Obsługuje baterię litową 2-4 lub 4-9-MH
Płytka PCB wysokiej jakości, prąd i możliwości, dobra liniowość

TSKY 120A Sensored Brushless ESC Elektroniczny kontroler prędkości dla modelu samochodu RC- niebieski

Może być bez pędzla i bez trybu bezszczotkowego (poczucie potrzeby bezszczotkowego drutu)
Wyjście BEC: 5 V / 3 A, tryb przełączania

Specyfikacja

Generał	Rodzaj: WYJŚCIE
Wymiar i waga	Waga produktu: 0,0740 kg Waga paczki: 0,1000 kg Rozmiar produktu (dł x szer x wys): 27,30 x 4,50 x 3,80 cm / 10,75 x 1,77 x 1,5 cala Rozmiar paczki (dł x szer x wys): 15,00 x 6,00 x 5,00 cm / 5,91 x 2,36 x 1,97 cala
Zawartość Paczki	Zawartość Paczki: 1 x ESC

Pokaż więcej

TSKY 120A Sensored Brushless ESC Elektroniczny kontroler prędkości dla modelu samochodu RC

Kolor

niebieski

Ilość - +

raty: wybierz

Dodaj do koszyka

anuluj

Ship to

Recenzje

4.44 *****

5 Star 12
4 Star 2
3 Star 0
2 Star 1
1 Star 1

Wszystkie ( 16 )
( 10 )
( 2 )

DAN

Mar 03,2016

Power source used: HKing 3S LiFePo4 4200 batteries. Used on: HKing Vandal with 3300KV generic brushless sensorless motor. I made it "waterproof" (I hope :) ) using Nanoprotech spray; disassembled it, sprayed it on, than assembled it back; Added extra layer of cheap eBay thermal pads (cheapest I found really); Used a power analyser to check the Amps the motor draws; It was about 70 Amps max with the config I had; About the product: - the fan is rated for 12 Volts, so using it with 2S LiPo will get the ESC hot in the long run, so keep that in mind; if you use 2S I would recommend using a proper fan; - good build quality, good solder joints; Programming the thing :) - use set button + manual (that I do not remember having it in the box) - did not use this method; - use USB Programming Adapter for HobbyKing X-Car 120A & 60A ESC; PRODUCT ID: 351000018 - I used this method, it works great! - use Turnigy Speed Controller Programming Card; PRODUCT ID: TG-Prog - I used this method, it works great also! No overheating issues, but that is normal considering the 9.9 Volts supplied by the LiFePo4 3S; Other users experienced problems using regular LiPo 3S and/or sensored motors. With my setup it was not the case, so for me it worked good. Exact same size as HKing 120 X-Car ESC, but I think the inside is different;
Suggestion:: - fan a bit slow even with 3S, so that might be a problem over time...

Marcos

May 21,2016

Beatifull esc looks like an expensive esc great quality of construction an can be programed with hobbywing program card the one you can connect to pc and can also change software, great esc and super low price.
Suggestion:: i recomend to change the fan with a 6v fan because it came with a 12v fan.

Thobias Vincensi

Sep 12,2016

High quallity for the price. unbeatble price. Upgradeble with Hobbywing LCD program box. works like a hobbywink 2.1v.
Suggestion:: No cons.

Alfredo

Dec 21,2017

Excellent TSKY 120A Sensored Brushless ESC for 1/10 and 1/8 car, good quality and low cost
Suggestion:: none

ANU

Sep 14,2016

Decent Price for the Specs. Build quality is good. Still need to test.
Suggestion:: None.

Vancsa

Aug 05,2017

Great esc for the price. Got 2, have been using them on 3s for months

shayne britton

Dec 30,2017

great esc you can program with hobbywing program boxs
Suggestion:: none so far

maria mar

Sep 26,2017

Funciona perfectamente, programable, sensored impecable. Montado en mi 1/10 con 2s no hay problema de ventilador.
Suggestion:: Nada en general, podria ser estanco, pero por este precio...