Otwórz naszą znakomitą darmową aplikację!!

Skorzystaj z okazji dostępnych WYŁĄCZNIE w aplikacji.

Otwórz APLIKACJĘ
apis florea 66mm zestaw bezszczotkowy RC Racing Drone
apis florea 66mm zestaw bezszczotkowy RC Racing Drone
apis florea 66mm zestaw bezszczotkowy RC Racing Drone
apis florea 66mm zestaw bezszczotkowy RC Racing Drone
apis florea 66mm zestaw bezszczotkowy RC Racing Drone
apis florea 66mm zestaw bezszczotkowy RC Racing Drone
apis florea 66mm zestaw bezszczotkowy RC Racing Drone
apis florea 66mm zestaw bezszczotkowy RC Racing Drone
1/1

apis florea 66mm zestaw bezszczotkowy RC Racing Drone - Colormix

See Translation
430.60zł
107.38
12 recenzje

Kupon:

promocja:

Support COD payment

Warehouse & Fee

Select
CN-099:Wyślij między: Sep 27 - Sep 29

Product Options

Select
Colormix
Odwiedź nasz sklep

Recenzje (12)

Bryson
Jul 10,2018
quality thick frame. I am pretty sure I will never break it. I had to use a drill bit to countersink the motor screws because they're not long enough. I love how tiny it is! pictures dont do it justice. i picked this drone because similar drone kits came with the 1103 motors and were 1s capable. these 1104 motors by furibee are the 7000kv. not the 6000kv advertised. but the 7k kv motors are better. they are good quality. I flashed the latest version of bl-heli onto the esc. there is some motor vibration that transfers to the frame, but nothing major, and it hasn't affected flight so far.I had doubts about the tiny f3 FC but I haven't had any issues and it flies decent. I flashed betaflight 3.4 and tuned it to my liking. it's also powering the receiver and a 4 led strip no problem. running dshot 600 as advertised. also I am able to run 8k gyro and 4k pid no problem.the 4 in 1 esc seems okay in quality. this is only a 2s esc. not a 1 to 2s esc. I flashed bl-heli 16.7 onto the esc's. it seems to work okay, doesn't get hot to the touch.came with 2 sets of props. xt30 connector and just connector. and a lot of standoffs. you have to get creative with the standoffs so that the props dont hit the stack.last is the camera, i could not get it to display a picture. it displays the osd just fine. but no picture. also it gets much to hot for only 25mw.IF SOMEONE FUGURES OUT THE CAMERA PLEASE LET US KNOW.
Pokaż więcej

Opis

Opis: apis florea z pewnością przyniesie Ci niespotykane wrażenia z wyścigów FPV. Dron wyścigowy ma solidną ramę z włókna węglowego i jest odporny na uderzenie. Zaadaptował popularny 4-w-1 BLHeli-S DShot ESC dla stabilnego zasilania. Nadajnik wideo może wysyłać wideo na żywo. Kontroler lotu F3 z wbudowanym menu OSD reaguje szybciej. Kamera mikro-FPV 800TVL zapewnia wysoką jakość FPV. Główne cechy: ● Trwałe z podwoziem z włókna węglowego 3K, jest solidniejsze ● Sterownik lotu OMNIBUS F3 zintegrowany z OSD reaguje szybciej ● 4-w-1 BLHeli - S 6A ESC zapewnia stabilną moc ● Kamera 800TVL, nadajnik wideo 5,8 GHz 40CH, 25 mW dla lotów wewnętrznych i długodystansowych Dane techniczne: Model: apis florea Silnik bezszczotkowy: 1104 6000KV Bezszczotkowy ESC: 4-w-1 BLHeli - S 6A (1 - 2S LiPo) Obsługa ESC: DShot150 / DShot300 / DShot600 Aparat: 800TVL Kamera FPV Czujnik CMOS Nadajnik wideo: 5.8GHz 40CH 25mW Kontroler lotu: OMNIBUS 1 - 2S F3, z OSD, STM32F303CCT6, MPU6000 Firmware kontrolera lotu: BetaFlight 3.1.7 Zalecana część (brak w zestawie): Pilot: powyżej 6CH Bateria: 1 - 2S 450 mAh 30C LiPo

Specyfikacja

Generał

Rodzaj: Zestaw ramek
Wersja: ZESTAW

Silnik

Model: apis florea
Typ silnika: Silnik bezszczotkowy

Kontroler lotu

Typ kontrolera lotu: F3

Aparat fotograficzny

Czujnik: CMOS

Elektroniczny kontroler prędkości

Oprogramowanie układowe: BLHeli-S
Funkcje: DShot150,DShot300,DShot600
Ciągły prąd: 4 x 6A

Wymiar i waga

Waga produktu: 0,0440 kg
Waga paczki: 0,0650 kg
Rozmiar produktu (dł x szer x wys): 6,50 x 6,50 x 6,00 cm / 2,56 x 2,56 x 2,36 cala
Rozmiar paczki (dł x szer x wys): 9,50 x 9,50 x 6,50 cm / 3,74 x 3,74 x 2,56 cala

Zawartość Paczki

Zawartość Paczki: 1 x kontroler lotu Omnibus F3, 1 x 4-in-1 BLheli_S 6A ESC, 4 x 1104 6000KV bezszczotkowy silnik, 1 x 800TVL CMOS 1/4 cala Kamera, 1 x 25 mW 40CH nadajnik, 1 x uchwyt kamery, 4 x śmigło CW , 4 x Śmigło CCW, 20 x Śruba
apis florea 66mm zestaw bezszczotkowy RC Racing Drone- Colormix
apis florea 66mm zestaw bezszczotkowy RC Racing Drone- Colormixapis florea 66mm zestaw bezszczotkowy RC Racing Drone- Colormix
apis florea 66mm zestaw bezszczotkowy RC Racing Drone- Colormix

Recommended Products

Sponsored Products

Premia dla nowego klienta: Kupon na 10 USD
430.60zł

apis florea 66mm zestaw bezszczotkowy RC Racing Drone

Kolor

Ilość - +
raty: wybierz
loading...
loading...
anuluj
loading...
loading...
loading...

Recenzje

4.42 *****
  • 6
  • 5
  • 1
  • 0
  • 0
  • Wszystkie ( 12 )
  • ( 10 )
  • ( 0 )
Bryson
Jul 10,2018
quality thick frame. I am pretty sure I will never break it. I had to use a drill bit to countersink the motor screws because they're not long enough. I love how tiny it is! pictures dont do it justice. i picked this drone because similar drone kits came with the 1103 motors and were 1s capable. these 1104 motors by furibee are the 7000kv. not the 6000kv advertised. but the 7k kv motors are better. they are good quality. I flashed the latest version of bl-heli onto the esc. there is some motor vibration that transfers to the frame, but nothing major, and it hasn't affected flight so far.I had doubts about the tiny f3 FC but I haven't had any issues and it flies decent. I flashed betaflight 3.4 and tuned it to my liking. it's also powering the receiver and a 4 led strip no problem. running dshot 600 as advertised. also I am able to run 8k gyro and 4k pid no problem.the 4 in 1 esc seems okay in quality. this is only a 2s esc. not a 1 to 2s esc. I flashed bl-heli 16.7 onto the esc's. it seems to work okay, doesn't get hot to the touch.came with 2 sets of props. xt30 connector and just connector. and a lot of standoffs. you have to get creative with the standoffs so that the props dont hit the stack.last is the camera, i could not get it to display a picture. it displays the osd just fine. but no picture. also it gets much to hot for only 25mw.IF SOMEONE FUGURES OUT THE CAMERA PLEASE LET US KNOW.
Suggestion:
one of the main issues is the description says 1s or 2s battery. the FC may be able to run off 1s, but the all-in-one will ONLY run off 2s. thought I had a bad esc board, but figured it out.another issue, I cannot get the camera to broadcast a picture. I've tried it on my other drone, and multiple wiring configurations. just a black screen. however, the osd is displayed, just no picture.if someone figures out the camera please let us know!!!there is no manual whatsoever. this is probably for someone who has built multiple drones. you definitely need some soldering skills and a steady hand. for wiring look up 16x16 omnibus f3
Sas
Jul 08,2018
Great little quadcopterComes with two pairs of 5 bladed 1.9" props and even a XT-30 connector along with the JST connector.Everything to build it, is included, except a manual, but if you do a google image search for Teeny F3 you can find a soldering diagram, so no big hassle.The motors are 1104 and of good quality, but are 7000kV (which is better for small props) not 6000kV as in the descriptionThe flightcontroller comes with Betaflight 3.3.0 and is allready set up for the frame, the board orientation and craft name etc.I get a black screen from the camera, so I think I have to switch the yellow and white cables on the flightcontroller.Picture of soldering diagram is in this review.
Suggestion:
No manualWeak solder pads
daive
Jul 25,2018
When assembling according to the photos of the site, USB comes in.Implementing FC under the frame will solve it.Because the kit is cheap, I will change the frame.As an idea, please refer to the installation method of Revenger 55.It is better for the receiver to choose ultra-small.Propeller Guard : Propeller Guard For Aurora 100 RX : $4 reciver , AFHDS 2ABUZZ & LED : Programmable LED Tail Lamp Buzzing Alarm Frame : X2 ELF 88mm Micro Brushless FPV Racing Frame KitFrame : 9.5g X2 Eyas 80mm Wheelbase Carbon Fiber Mini FPV Racing Frame Kit
Suggestion:
non , i like this item.
Ed
Nov 09,2018
So, 4in1 etc was a fail. Camera also didn’t transmit so well. And frame, pretty impossible to build and not accidentally break some green mounts. Only things that are salvageable would be motors (meh), the frame, & props. May actually try building something eventually.
daive
Jun 26,2018
With this content, this price is impossible.Gearbest Wonderful.Take care Motor mount screw.After assembly, test with the 19/18/17/15 inch propeller.I am interested in flying in 1S.
Suggestion:
non
corrales2018
Sep 02,2018
Well I jumped on this deal when it was about 50 dollars. I'm still working on the build but everything looks good. Please include instructions of some kind. I can't find a build video to guide me.
Gil
Jul 02,2018
Great flight controller and esc's, turtle mode and easy to set up. Good camera.OK transmitter.Solid frame.
Suggestion:
Cameras image handling is kind of lacking. The transmitter power is low by the 25mw standard. The frame is too small for these components. A 80mm frame would be more appropriate. I ended up ditching the frame and went for a 75mm tiny whoop style, plastic frame, with 1103 8000kv motors (10,000kv would be better). Can't be happier, except for the AIO camera.
naimanb
Jul 22,2018
Almost all you need to start flying (add battery and receiver)Extremely fun to fly and works great with 300 to 450 mah 2S batteries
Suggestion:
Need a very small receiver and it is not easy to know when to place the antenna.Missing instructions make it more suitable as a second quad after you learn the basics
KIT FuriBee apis florea 66mm Brushless
Oct 08,2018
Mini drone de excelente qualidade.Ainda vou terminar de motar e realizar testes, mais a qualidade dos componentes transmite confiança.
Сергей Акуленко
Jul 19,2018
Хороший комплект для сборки. Но неработает один мотор, неисправен мотор или регулятор еще выясняю.
Suggestion:
Бракованый регулятор,мотор
Pokaż więcej
Pokaż więcej
Pokaż więcej